Providence® with Progressive Correction-Patient Instructions
Patient Nightly Instructions
1.
Make sure the cell phone is plugged in, turned on, and located near your bed.
2.
Hold down the On/Off button on the control box until the light turns Orange (you will hear one beep)
3.
Open the “Progessive Correction App”. You will need to enter the provided PIN below to access this app for the first time after the phone has been turned on.
4.
Pair your control box with your phone - select the device ID followed by the connect button. If the ID doesn’t appear, turn the box off and on, and click the scan button.
5.
After successful pairing the light on the box will turn Blue. Make sure there aren’t any competing bluetooth devices in the same area (bluetooth speakers, earbuds, etc.)
6.
After successful pairing put your brace on and tighten to the line on the strap set by your orthotist.
7.
Tap the start button on your phone and lay down to sleep. Nothing will happen for 15 minutes giving you time to fall asleep. This 15 minute Start Delay can be adjusted anywhere from 0-60 minutes. This can be accessed by clicking the settings symbol on the top right of the Start/Stop Page.
8.
Once on the settings page use the scroll dial to adjust to the desired Start/Delay Time and then click the “Save” button to return to the Start Stop Page.
9.
During the night the pump in the control box will turn on and off according to a set schedule.
10.
Be sure to plug in your brace after wearing it during the night - so it will be ready for its next use. The orange light on the control box will blink when charging. When the control box is fully charged, the light will stop blinking. Check your brace score each morning.
For help call 800 253 7868